Moog Videolarm VLC485 Spezifikationen PDF herunterladen

Speciﬁ cation Catalog

Number Section

INSTRUCTIONS 5240 2C

MODEL: Pan/Tilt Controller

VLC485

PRODUCT INSTRUCTIONS

2525 Park Central Blvd. • Decatur, GA 30035 • (770) 987-7550 • 800-554-1124 • Fax 800-826-0366 • www.videolarm.com

Page No.

1.0 Table of Contents 1

1.1 General Description 1

1.2 Speciﬁ cation 1

1.3 Included Accessories 2

1.4 Location and Description of Controls 2

1.5 Location of Connectors 2

1.6 Connections 3

2.0 Control of Basic Functions 3

2.1 Camera SelectionPan/Tilt Movement 3

2.2 Camera Zoom/ Focus/Iris Functions 3

2.3 Pan/Tilt Movement 3

2.4 Presets 3

2.5 Autotour 4

2.6 Sequencing 4

2.7 Alarms 4

3.0 Menu Items 4

3.1 Dome Selection Type 4

3.2 Multiplexer Type 4

3.3 Preset Lockout 4

3.4 Autotour Dwell 5

3.5 Beep Enable 5

3.6 Sequence 5

3.7 Sequence Dwell 6

3.8 Alarms 6

3.9 Pass Code 6

4.0 PC Port 6

4.1 PC Port Commands 6

4.2 General Command Message Format 6

4.3 Motion Command Messages 6

4.4 Preset and Dome Parameter Messages 7

4.5 Controller Parameter Messages 7

4.6 Custom Controller LCD Messages 7

for TOSHIBA

1.1 GENERAL DESCRIPTION

The VLC485 is a pan/tilt controller that ties together the major

elements of an integrated system and provides a single human

interface for the system. As such, the VLC485 can control pan/tilt

units, interface to multiplexers, and communicate with a personal

computer for computer-controlled operation.

The LCD is used to display current status as well as to provide a

menu system for setting operational parameters.

The VLC485 is designed for desktop operation; all connectors are

located in the rear of the unit so that all cables can be routed from

the back of the unit.

1.0 TABLE OF CONTENTS

1.2 SPECIFICATIONS

Power Source

Data Connections

Pan/Tilt Control

Camera Control

Multiplexer Control

Alarms

Conﬁ guration

Display

External Serial

Communications Port

Operating Environment

4-pin compression connector:

RS485/422 Pan/Tilt control net-

work.

9-pin d-sub connector: RS232 mul-

tiplexer port.

9-pin d-sub connector: RS232

external serial communications

port.

5v DC 250 ma.

Maximum number of pan/tilts: 99.

Protocols: Videolarm, Sensormatic,

Pelco, and Kalatel.

Manual control: pan, tilt via joy-

stick.

Speed: Variable.

Presets: go to, set, clear.

Autotour (Videolarm protocol): on,

off, set dwell, set speed.

Manual control: Zoom, focus, iris.

Auto: focus, iris (where supported

by camera).

Protocols: TBD.

Number of channels: up to 32.

Eight external alarm inputs and

one relay contact alarm output.

Menu driven, access controlled

by optional passcode.

LCD, 20 character x 2 lines.

9600 baud, 8 bits, 1 start, 1stop,

no parity

Protocols: Videolarm, Pelco P.

Temperature: 0˚ C – 50˚ C.

Humidity: 90% maximum (non-

condensing).

Altitude: 10,000 ft. maximum.

A NOTE BEFORE BEGINNING

Each camera controlled by the VLC485 must have a unique

address. The default address for most cameras is "1". See the

instructions for your camera for steps to change the address.

1 2 3 4 5 6 7 8 9

Inhaltsverzeichnis

Seite 1 - PRODUCT INSTRUCTIONS

Speciﬁ cation Catalog Number SectionINSTRUCT

Seite 2 - (for future use)

- 2 -1.4 LOCATION AND DESCRIPTION OF CONTROLS1.3 INCLUDED ACCESSORIES(1) Control Output Connector(1) Alarm Output Connector(1) 5 VDC AC Adapter1.5

Seite 3

- 3 -1.6 CONNECTIONSThere are ﬁ ve connectors on the VLC485 Controller. These connec-tors are a 9-pin connector for RS232 connections to a PC, a 9-pi

Seite 4 - 1, 2, 3

- 4 -2.5 AUTO TOURThe VLC485 can accommodate pan/tilts that support Auto tour functions. To start a pan/tilt on an Autotour, press the AUTO TOUR butt

Seite 5

- 5 -3.4 AUTO TOUR DWELLAuto tour Dwell deﬁ nes how long the pan/tilt will stay at each preset in the auto tour. This parameter is preset in the pan/

Seite 6

- 6 -3.7 SEQUENCE DWELLThe sequence dwell interval deﬁ nes how long the camera will stay active in the sequence. The factory default dwell time is 3

Seite 7

- 7 -4.4 PRESET AND DOME PARAMETER MESSAGESThese commands control the position presets and some of the opera-tional parameters of the pan/tilt platfo

Seite 8 - PC System

- 8 -The VLC485 can be used in as a stand-alone unit or as part of a system. As part of a system, the unit may be used with another VLC485 or with a P

Seite 9 - 24 HOUR TECHNICAL SUPPORT

- 9 -SAFETY PRECAUTIONSUNPACKING Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an item appears to hav

Kommentare zu diesen Handbüchern

Keine Kommentare

Moog Videolarm VLC485 Spezifikationen

Stöbern Sie online oder laden Sie Spezifikationen nach Kamerazubehör Moog Videolarm VLC485 herunter. Moog Videolarm VLC485 Specifications Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern